BD SERIES TUBING PIPE ELEVATORS
BD-Series tubing elevators are the main tool for elevating or dropping tubing pipes in the works of well drilling. The BD tubing elevators of our company are fit for hanging pipes from 1.9"～4 1/2"and all kinds of correspondent external upset tubing pipe.
Single head type
Type | Extermal Dia.and Form of Extermal Upset(in) | Bore Dia.
(mm) | Max.Load
KN(t) | Marking | BD 50/360(1.9/40) | 1.9 | 50 | 360(40) | BD 1.9/40 8A | BD 63/360(2 3/8/40) | 2 3/8 | 63 | BD 2 3/8/40 8A | BD 76/360(2 7/8/40) | 2 7/8 | 76 | BD 2 7/8/40 8A | BD 50/585(1.9/65) | 1.9 | 50 | 585(65) | BD 1.9/65 8A | BD 63/585(2 3/8/65) | 2 3/8 | 63 | BD 2 3/8/65 8A | BD 76/585(2 7/8/65) | 2 7/8 | 76 | BD 2 7/8/65 8A | BD 92/585(3 1/2/65) | 3 1/2 | 92 | BD 3 1/2/65 8A | BD 63/675(2 3/8/75) | 2 3/8 | 63 | 675(75) | BD 2 3/8/75 8A | BD 76/675(2 7/8/75) | 2 7/8 | 76 | BD 2 7/8/75 8A | BD 92/675(3 1/2/75) | 3 1/2 | 92 | BD 3 1/2/75 8A | BD 104/675(4/75) | 4 | 104 | BD 4/75 8A | BD 117/675(4 1/2/75) | 4 1/2 | 117 | BD 4 1/2/75 8A |
|
Double head type
Type | Extermal Dia.and Form of Extermal Upset | Bore Dia. | Max.Load | Marking |
Top Bore | Bottom Bore |
BD50×56/360(1.9EU/40) | 1.9EU | 56 | 50 | 360（40） | BD1.9EU/40 8A |
BD63×68/360(2 3/8EU/40) | 2 3/8EU | 68 | 63 | BD2 3/8 EU/40 8A |
BD76×82/360(2 7/8EU/40) | 2 7/8EU | 82 | 76 | BD2 7/8 EU/40 8A |
BD50×56/585(1.9EU/65) | 1.9EU | 56 | 50 | 585（65） | BD1.9EU/65 8A |
BD63×68/585(2 3/8 EU/65) | 2 3/8EU | 68 | 63 | BD2 3/8EU/65 8A |
BD76×82/585(2 7/8EU/65) | 2 7/8EU | 82 | 76 | BD2 7/8 EU/65 8A |
BD92×98/585(3 1/2EU/65) | 3 1/2EU | 98 | 92 | BD3 1/2EU/65 8A |
BD104×110/585(4EU/65) | 4EU | 110 | 104 | BD4 EU/65 8A |
BD117×123/585(4 1/2EU/65) | 4 1/2EU | 123 | 117 | BD4 1/2EU/65 8A |
BD63×68/675(2 3/8EU/75) | 2 3/8EU | 68 | 63 | 675（75） | BD2 3/8EU/75 8A |
BD76×82/675(2 7/8EU/75) | 2 7/8EU | 82 | 76 | BD2 7/8EU/75 8A |
BD92×98/675(3 1/2EU/75) | 3 1/2EU | 98 | 92 | BD3 1/2EU/75 8A |
BD104×110/675(4EU/75) | 4EU | 110 | 104 | BD4EU/75 8A |
BD117×123/675(4 1/2EU/75) | 4 1/2EU | 123 | 117 | BD4 1/2EU/75 8A |
Must specify O.D. size and type of tubulars (plain or upset)
DD SERIES TUBING ELEVATORS
DD-Series Tubing elevators are the necessary tools for elevating or dropping tubing pipes in the works of well drilling. The tubing elevators of our company are fit for tubing pipes from 2 3/8" to 4 1/2" and all kinds of correspondent external upset tubing pipes.
MAIN PARAMETERS OF DD SERIES TUBING PIPE ELEVATORS
Type | Extermal Dia.
and Form of
Extermal Upset
(in) | Bore Dia.
(mm) | Max.Load
KN(t) | Marking | TOP | Bottom | DD62/1125(2 3/8/125) | 2 3/8 | 62 | 62 | 1125(125) | DD2 3/8/125 8A | DD62×68/1125(2 3/8EU/125) | 2 3/8EU | 68 | 62 | DD2 3/8EU/125 8A | DD75/1125(2 7/8/125) | 2 7/8 | 75 | 75 | DD2 7/8/125 8A | DD75×81/1125(2 7/8EU/125) | 2 7/8EU | 81 | 75 | DD2 7/8EU/125 8A | DD91/1125(3 1/2/125) | 3 1/2 | 91 | 91 | DD3 1/2/125 8A | DD91×98/1125(3 1/2EU/125) | 3 1/2EU | 98 | 91 | DD3 1/2EU/125 8A | DD104/1125(4/125) | 4 | 104 | 104 | DD4/125 8A | DD104×110/1125(4EU/125) | 4EU | 110 | 104 | DD4EU/125 8A | DD75/1350(2 7/8/150) | 2 7/8 | 75 | 75 | 1350(150) | DD2 7/8/150 8A | DD75×81/1350(2 7/8EU/150) | 2 7/8EU | 81 | 75 | DD2 7/8EU/150 8A | DD91/1350(3 1/2/150) | 3 1/2 | 91 | 91 | DD3 1/2/150 8A | DD91×98/1350(3 1/2EU/150) | 3 1/2EU | 98 | 91 | DD3 1/2EU/150 8A | DD104/1350(4/150) | 4 | 104 | 104 | DD4/150 8A | DD104×110/1350(4EU/150) | 4U | 110 | 104 | DD4EU/150 8A | DD117/1350(4 1/2/150) | 4 1/2 | 117 | 117 | DD4 1/2/150 8A | DD117×123/1350(4 1/2EU/150) | 4 1/2EU | 123 | 117 | DD41/2EU/150 8A |
|
DD SERIES DRILL PIPE ELEVATORS
DD Drill pipe Elevators are the necessary tools to hang drill pipe in the drilling operation. They are divided into square shoulder and taper shoulder (18°)according to the type of drill pipe joints. Taper shoulder Elevators are named Type DDZ.
MAIN PARAMETERS OF DD SERIES DRILL PIPE ELEVATORS （Fit for square shoulder joints）
Type | Join code & type | Drill pipe type
(in) | Max.Load
KN(t) | Marking | DD76×84/1350（2 7/8EU/150） | NC31（2 7/8IF） | 2 7/8EU | 1350(150) | DD2 7/8EU/150 8A | DD92×102/1350（3 1/2EU/150） | NC38（3 1/2IF） | 3 1/2EU | DD3 1/2EU/150 8A | DD102//1350（3 1/2EU/150） | NC40（3 1/2IF） | 3 1/2EU | DD3 1/2EU/150 8A | DD118×131/1350（4 1/2EU/150） | NC46（4 1/2IF） | 4 1/2EU | DD4 1/2EU/150 8A | DD131×134/1350（5IEU/150） | NC50（5IF） | 5IEU | DD5IEU/150 8A | DD76×84/1800（2 7/8EU/200） | NC31（2 7/8IF） | 2 7/8EU | 1800(200) | DD2 7/8EU/200 8A | DD92×102/1800（3 1/2EU/200） | NC38（3 1/2IF） | 3 1/2EU | DD3 1/2EU/200 8A | DD102/1800（3 1/2EU/200） | NC40（3 1/2FH） | 3 1/2EU | DD3 1/2EU/200 8A | DD118×131/1800（4 1/2EU/200） | NC46（4 1/2IF） | 4 1/2EU | DD4 1/2EU/200 8A | DD131×134/1800（5IEU/200） | NC50（5IF） | 5IEU | DD5IEU/200 8A | DD76×84/2250（2 7/8EU/250） | NC31（2 7/8IF） | 2 7/8EU | 2250(250) | DD2 7/8EU/250 8A | DD92×102/2250（3 1/2EU/250） | NC38（3 1/2IF） | 3 1/2EU | DD3 1/2EU/250 8A | DD118×131/2250（4 1/2EU/250） | NC46（4 1/2IF） | 4 1/2EU | DD4 1/2EU/250 8A | DD131×134/2250（5IEU/250） | NC50（5IF） | 5IEU | DD5IEU/250 8A | DD76×84/3150（2 7/8EU/350） | NC31（2 7/8IF） | 2 7/8EU | 3150(250) | DD2 7/8EU/350 8A | DD92×102/3150（3 1/2EU/350） | NC38（3 1/2IF） | 3 1/2EU | DD3 1/2EU/350 8A | DD118×131/3150（4 1/2EU/350） | NC46（4 1/2IF） | 4 1/2EU | DD4 1/2EU/350 8A | DD131×134/3150（5IEU/350） | NC50（5IF） | 5IEU | DD5IEU/350 8A |
|
MAIN PARAMETERS OF DDZ SERIES DRILL PIPE ELEVATORS （Fit for taper shoulder joints）
Type | Join code & type | Drill pipe type
(in) | Max.Load
KN(t) | Marking | DDZ63/1350（2 3/8EU/150） | NC36（2 3/8 IF） | 2 3/8EU | 1350(150) | DDZ 2 3/8EU/150 8A | DDZ83/1350（2 7/8EU/150） | NC31（2 7/8 IF） | 2 7/8EU | DDZ 2 7/8EU/150 8A | DDZ101/1350（3 1/2EU/150） | NC38（3 1/2 IF） | 3 1/2EU | DDZ 3 1/2EU/150 8A | DDZ101/1800（3 1/2EU/200） | NC38（3 1/2 IF） | 3 1/2EU | 1800(200) | DDZ 3 1/2EU/200 8A | DDZ121/1800（4 1/2IU/200） | NC46（4 1/2 IF） | 4 1/2IU | DDZ 4 1/2IU/200 8A | DDZ133/1800（4 1/2EU/200） | NC50（4 1/2 IF） | 4 1/2EU | DDZ 4 1/2EU/200 8A | DDZ101/2250（3 1/2EU/250） | NC40（3 1/2 FH） | 3 1/2EU | 2250(250) | DDZ 3 1/2EU/250 8A | DDZ121/2250（4 1/2IU/250） | NC46（4 1/2 IF） | 4 1/2EU | DDZ 4 1/2IU/250 8A | DDZ133/2250（5 IEU/250） | NC50（5 IF） | 5 IEU | DDZ 5 IEU/250 8A | DDZ101/3150（3 1/2EU/350） | NC38（3 1/2 IF） | 3 1/2EU | 3150(350) | DDZ 3 1/2EU/350 8A | DDZ109/3150（4 IU/350） | NC40（4 FH） | 4 IEU | DDZ 4 IU/350 8A | DDZ121/3150（4 1/2IU/350） | NC46（4 1/2 IF） | 4 1/2IU | DDZ 4 1/2IU/350 8A | DDZ133/3150（5 IEU/350） | NC50（5 IF） | 5 IEU | DDZ 5 IEU/350 8A | DDZ148/3150（5 1/2IEU/350） | 5 1/2FH | 5 1/2IEU | DDZ 5 1/2IEU/350 8A |
|
DD DRILL COLLAR ELEVATOR
DD Drill collar Elevators are the necessary tools to hang drill collar in the drilling operation.
Type | Spec of drill collar | Elevators Recess Dia.(in) | Max.Load
KN(t) | Marking | DD146/1350(6 1/4/150) | 6 1/4 | 5 5/8 | 1350
(150) | DD6 1/4/150 | DD152/1350(6 1/2/150) | 6 1/2 | 5 7/8 | DD6 1/2/150 | DD163/1350(7/150) | 7 | 6 1/4 | DD7/150 | DD188/1350(8/150) | 8 | 7 1/4 | DD8/150 | DD202/1350(8 1/2/150) | 8 1/2 | 7 3/4 | DD8 1/2/150 | DD146/1800(6 1/4/200) | 6 1/4 | 5 5/8 | 1800
(200) | DD6 1/4/200 | DD152/1800(6 1/2/200) | 6 1/2 | 5 7/8 | DD6 1/2/200 | DD163/1800(7/200) | 7 | 6 1/2 | DD7/200 | DD188/1800(8/200) | 8 | 7 1/4 | DD8/200 | DD202/1800(8 1/2/200) | 8 1/2 | 7 3/4 | DD8 1/2/200 | DD212/1800(9/200) | 9 | 8 1/2 | DD9/200 |
|
DDF AUXILIARY ELEVATORS
DDF Auxiliary Elevators are the necessary tools to handle casing in the drilling and fixing operation. They are designed and manufactured in according with API Spec 8A.
MAIN PARAMETERS OF DDF AUXILIARY ELEVATORS
Type | Spec of Casing(in) | Bord Dia.(mm) | Max.Load KN(t) | DDF117/45(4 1/2/5) | 4 1/2 | 116.69 | 45(5) | DDF142/45(5 1/2/5) | 5 1/2 | 142.88 | DDF171/45(6 5/8/5) | 6 5/8 | 171.45 | DDF181/45(7/5) | 7 | 180.98 | DDF197/45(7 5/8/5) | 7 5/8 | 197.64 | DDF223/45(8 5/8/5) | 8 5/8 | 223.04 | DDF248/45(9 5/8/5) | 9 5/8 | 248.44 | DDF277/45(10 3/4/5) | 10 3/4 | 277.83 | DDF331/45(12 7/8/5) | 12 7/8 | 331.80 | DDF344/45(13 3/8/5) | 13 3/8 | 344.50 | DDF350/45(13 5/8/5) | 13 5/8 | 350.85 | DDF360/45(14/5) | 14 | 360.76 | DDF411/45(16/5) | 16 | 411.40 | DDF479/90(18 5/8/10) | 18 5/8 | 479.43 | 90(10) | DDF515/90(20/10) | 20 | 515.14 |
|
CD SERIES DRILL PIPE ELEVATORS
CD-Series Drill pipe Elevators are the necessary tools to hang drill pipes in the drilling operation.They are divided into square shoulder and taper shoulder according to the type of drill pipe joints.Taper shoulder Elevators are named Type CDZ.They are designed and manufactured in according with API Spec 8A.
MAIN PARAMETERS OF CD DRILL PIPE ELEVATORS
Type | Joint code & type | Drill pipe type | Max.Load KN(t) | Marking | CD76×84/1125(2 7/8EU/125) | NC31(2 7/8IF) | 2 7/8EU | 1125(125) | CD2 7/8EU/125 8A | CD92×102/1125(3 1/2EU/125) | NC38(3 1/2IF) | 3 1/2EU | CD3 1/2EU/125 8A | CD102/1125(3 1/2EU/125) | NC40(4FH) | 3 1/2EU | CD3 1/2EU/125 8A | CD76×84/1350(2 7/8EU/150) | NC31(2 7/8IF) | 2 7/8EU | 1350（150） | CD2 7/8EU/150 8A | CD92×102/1350(3 1/2EU/150) | NC38(3 1/2IF) | 3 1/2EU | CD3 1/2EU/150 8A | CD102/1350(3 1/2EU/150) | NC40(4FH) | 3 1/2EU | CD3 1/2EU/150 8A | CD118×131/1350(4 1/2EU/150) | NC40(4 1/2FH) | 4 1/2EU | CD4 1/2EU/150 8A | CD131×134/1350(5IEU/150) | NC50(4 1/2FH) | 5IE | CD5 IEU/150 8A | CD76×84/1800(2 7/8EU/200) | UC31(2 7/8IF) | 2 7/8EU | 1800（200） | CD2 7/8EU/200 8A | CD92×102/1800(3 1/2EU/200) | NC38(3 1/2IF) | 3 1/2EU | CD3 1/2EU/200 8A | CD102/1800(3 1/2EU/200) | NC40(4 1/2FH) | 3 1/2EU | CD3 1/2EU/200 8A | CD118×131/1800(4 1/2EU/200) | NC50(4 1/2EU) | 4 1/2EU | CD4 1/2EU/200 8A | CD131×134/1800(5IEU/200) | NC50(5IF) | 5IEU | CD5 IEU/200 8A | CD76×84/2250(2 7/8EU/250) | NC31(2 7/8IF) | 2 7/8EU | 2250（250） | CD2 7/8EU/250 8A | CD92×102/2250(3 1/2EU/250) | NC38(3 1/2IF) | 3 1/2EU | CD3 1/2EU/250 8A | CD131×134/2250(4 1/2EU/250) | NC50(4 1/2IF) | 4 1/2EU | CD4 1/2EU/250 8A | CD76×84/3150(2 7/8EU/350) | NC31(2 7/8IF) | 2 7/8EU | 3150（350） | CD2 7/8EU/350 8A | CD92×102/3150(3 1/2EU/350) | NC38(3 1/2IF) | 3 1/2EU | CD3 1/2EU/350 8A | CD131×134/3150(4 1/2EU/350) | NC50(4 1/2IF) | 4 1/2EU | CD4 1/2EU/350 8A | CD76×84/4500(2 7/8EU/500) | NC31(2 7/8IF) | 2 7/8EU | 4500（500） | CD2 7/8EU/500 8A | CD92×102/4500(3 1/2EU/500) | NC38(3 1/2IF) | 3 1/2EU | CD3 1/2EU/250 8A | CD131×134/4500(5IEU/500) | NC50(5IF) | 5IEU | CD5IEU/500 8A |
|
CDZ SERIES DRILL PIPE ELEVATORS
MAIN PARAMETERS OF CD SERIES DRILL PIPE ELEVATORS
Type | Joint code&type | Drill pipe type | Max.Load | Marking |
CDZ67/1125(2 3/8EU/125) | NC26(2 3/8IF) | 2 3/8EU | 1125(125) | CDZ2 3/8EU/125 8A |
CDZ83/1125(2 7/8EU/125) | NC31(2 7/8IF) | 2 7/8EU | CDZ2 7/8EU/125 8A |
CDZ83/1350(2 7/8EU/150) | NC31(2 7/8IF) | 2 7/8EU | 1350(150) | CDZ2 7/8EU/150 8A |
CDZ101/1350(3 1/2EU/150) | NC38(3 1/2IF) | 3 1/2EU | CDZ3 1/2EU/150 8A |
CDZ67/1800(2 3/8EU/200) | NC26(2 3/8IF) | 2 3/8EU | 1800(200) | CDZ2 3/8EU/200 8A |
CDZ83/1800(2 7/8EU/200) | NC31(2 7/8IF) | 2 7/8EU | CDZ2 7/8EU/200 8A |
CDZ101/1800(3 1/2EU/200) | NC38(3 1/2IF) | 3 1/2EU | CDZ3 1/2EU/200 8A |
CDZ133/1800(5IEU/200) | NC50(4 1/2IF) | 5IEU | CDZ5IEU/200 8A |
CDZ101/2250(3 1/2EU/250) | NC38(3 1/2IF) | 3 1/2EU | 2250(250) | CDZ3 1/2EU/250 8A |
CDZ133/2250(5IEU/250) | NC50(4 1/2IF) | 5IEU | CDZ5IEU/250 8A |
CDZ148/2250(5 1/2EU/250) | 5 1/2FH | 5 1/2IEU | CDZ5 1/2EU/250 8A |
CDZ101/3150(3 1/2EU/350) | NC38(3 1/2IF) | 3 1/2EU | 3150(350) | CDZ3 1/2EU/350 8A |
CDZ133/3150(5IEU/350) | NC50(4 1/2IF) | 5IEU | CDZ5IEU/350 8A |
CDZ148/3150(5 1/2IEU/350) | 5 1/2FH | 5 1/2IEU | CDZ5 1/2EU/350 8A |
CD SERIES CASING ELEVATORS
CD-Series Casing Elevators are the necessary tools to hang drill pipes in the drilling operation.They can hang casing sizes from 4 1/2" to 24 1/2".The Max.Load are six series:125t,150t,200t,250t,350t,500t.They are designed and manufactured in according with API Spec 8A.
MAIN PARAMETERS OF CD SERIES CASING PIPE ELEVATORS
Type | Bore Dia(mm) | Casing OD mm(in) | Max.Load(t) | Marking |
CD277/1125(10 3/4/125) | 277 | 273.05(10 3/4) | 1125(125) | CD10 3/4/125 8A |
CD332/1125(12 7/8/125) | 332 | 327.03(12 7/8) | CD12 7/8/125 8A |
CD344/1125(13 3/8/125) | 344 | 339.73(13 3/8) | CD13 3/8/125 8A |
CD360/1125(14/125) | 360 | 355.60(14) | CD14/125 8A |
CD411/1125(16/125) | 411 | 406.40(16) | CD16/125 8A |
CD513/1125(20/125) | 513 | 508.00(20) | CD20/125 8A |
CD630/1125(24 1/2/125) | 630 | 622.30(24 1/2) | CD24 1/2/125 8A |
CD117/1350(4 1/2/150) | 117 | 114.30(4 1/2) | 1350(150) | CD4 1/2/150 8A |
CD142/1350(5 1/2/150) | 142 | 139.70(5 1/2) | CD5 1/2/150 8A |
CD197/1350(7 5/8/150) | 197 | 193.68(7 5/8) | CD7 5/8/150 8A |
CD277/1350(10 3/4/150) | 277 | 273.05(10 3/4) | CD10 3/4/150 8A |
CD331/1350(12 7/8/150) | 331 | 327.03(12 7/8) | CD12 7/8/150 8A |
CD334/1350(13 3/8/150) | 344 | 339.73(13 3/8) | CD13 3/8/150 8A |
CD117/1800(4 1/2/200) | 177 | 114.30(4 1/2) | 1800(200) | CD4 1/2/200 8A |
CD142/1800(5 1/2/200) | 142 | 139.70(5 1/2) | CD5 1/2/200 8A |
CD171/1800(6 5/8 200) | 171 | 168.28(6 5/8) | CD6 5/8/200 8A |
CD181/1800(7/200) | 181 | 177.80(7) | CD7/200 8A |
CD197/1800(7 5/8/200) | 197 | 193.68(7 5/8) | CD7 5/8/200 8A |
CD201/1800(7 3/4/200) | 201 | 196.85(7 3/4) | CD7 3/4/200 8A |
CD222/1800(8 5/8/200) | 222 | 219.08(8 5/8) | CD8 5/8/200 8A |
CD248/1800(9 5/8/200) | 248 | 244.48(9 5/8) | CD9 5/8/200 8A |
CD255/1800(9 7/8/200) | 255 | 250.83(9 7/8) | CD9 7/8/200 8A |
CD277/1800(10 3/4/200) | 277 | 273.05(10 3/4) | CD10 3/4/200 8A |
CD303/1800(11 3/4/200) | 303 | 298.48(11 3/4) | CD11 3/4/200 8A |
CD329/1800(12 7/8/200) | 329 | 327.03(12 7/8) | CD12 7/8/200 8A |
CD344/1800(13 3/8/200) | 344 | 339.73(13 3/8) | CD13 3/8/200 8A |
CD350/1800(13 5/8/200) | 350 | 346.08(13 5/8) | CD13 5/8/200 8A |
CD360/1800(14/200) | 360 | 355.60(14/200) | CD14/200 8A |
CD411/1800(16/200) | 411 | 406.40(16) | CD16/200 8A |
CD478/1800(18 5/8/200) | 478 | 473.08(18 5/8) | CD18 5/8/200 8A |
CD513/1800(20/200) | 513 | 508.00(20) | CD20/200 8A |
CD617/1800(24/200) | 617 | 609.60(24) | CD24/200 8A |
CD630/1800(24 1/2/200) | 630 | 622.30(24 1/2) | CD24 1/2/200 8A |
CD117/2250(4 1/2/250) | 117 | 114.30(4 1/2) | 2250(250) | CD4 1/2/250 8A |
CD142/2250(5 1/2/250) | 142 | 139.70(5 1/2) | CD5 1/2/250 8A |
CD171/2250(6 5/8 250) | 171 | 168.28(6 5/8) | CD6 5/8/250 8A |
CD181/2250(7/250) | 181 | 177.80(7) | CD7/250 8A |
CD197/2250(7 5/8/250) | 197 | 193.68(7 5/8) | CD7 5/8/250 8A |
CD201/2250(7 3/4/250) | 201 | 196.85(7 3/4) | CD7 3/4/250 8A |
CD222/2250(8 5/8/250) | 222 | 219.08(8 5/8) | CD8 5/8/250 8A |
CD248/2250(9 5/8/250) | 248 | 244.48(9 5/8) | CD9 5/8/250 8A |
CD255/2250(9 7/8/250) | 255 | 250.83(9 7/8) | CD9 7/8/250 8A |
CD277/2250(10 3/4/250) | 277 | 273.05(10 3/4) | CD10 3/4/250 8A |
CD303/2250(11 3/4/250) | 303 | 298.48(11 3/4) | CD11 3/4/250 8A |
CD329/2250(12 7/8/250) | 329 | 327.03(12 7/8) | CD12 7/8/250 8A |
CD344/2250(13 3/8/250) | 344 | 339.73(13 3/8) | CD13 3/8/250 8A |
CD350/2250(13 5/8/250) | 350 | 346.08(13 5/8) | CD13 5/8/250 8A |
CD360/2250(14/250) | 360 | 355.60(14/200) | CD14/250 8A |
CD411/2250(16/250) | 411 | 406.40(16) | CD16/250 8A |
CD478/2250(18 5/8/250) | 478 | 473.08(18 5/8) | CD185/8/250 8A |
CD513/2250(20/250) | 513 | 508.00(20) | CD20/250 8A |
CD617/2250(24/250) | 617 | 609.60(24) | CD24/250 8A |
CD630/2250(24 1/2/250) | 630 | 622.30(24 1/2) | CD24 1/2/250 8A |
CD117/3150(4 1/2/350) | 117 | 114.30(4 1/2) | 3150(350) | CD4 1/2/350 8A |
CD142/3150(5 1/2/350) | 142 | 139.70(5 1/2) | CD5 1/2/350 8A |
CD171/3150(6 5/8 350) | 171 | 168.28(6 5/8) | CD6 5/8/350 8A |
CD181/3150(7/350) | 181 | 177.80(7) | CD7/350 8A |
CD197/3150(7 5/8/350) | 197 | 193.68(7 5/8) | CD7 5/8/350 8A |
CD201/3150(7 3/4/350) | 210 | 196.85(7 3/4) | CD7 3/4/350 8A |
CD222/3150(8 5/8/350) | 222 | 219.08(8 5/8) | CD8 5/8/350 8A |
CD248/3150(9 5/8/350) | 248 | 244.48(9 5/8) | CD9 5/8/350 8A |
CD255/3150(9 7/8/350) | 255 | 250.83(9 7/8) | CD9 7/8/350 8A |
CD277/3150(10 3/4/350) | 277 | 273.05(10 3/4) | CD10 3/4/350 8A |
CD303/3150(11 3/4/350) | 303 | 298.48(11 3/4) | CD11 3/4/350 8A |
CD329/3150(12 7/8/350) | 329 | 327.03(12 7/8) | CD12 7/8/350 8A |
CD344/3150(13 3/8/350) | 344 | 339.73(13 3/8) | CD13 3/8/350 8A |
CD350/3150(13 5/8/350) | 350 | 346.08(13 5/8) | CD13 5/8/350 8A |
CD360/3150(14/350) | 360 | 355.60(14) | CD14/350 8A |
CD411/3150(16/350) | 411 | 406.40(16) | CD16/350 8A |
CD478/3150(18 5/8/350) | 478 | 473.08(18 5/8) | CD18 5/8/350 8A |
CD513/3150(20/350) | 513 | 508.00(20) | CD20/350 8A |
CD617/3150(24/350) | 617 | 609.60(24) | CD24/350 8A |
CD630/3150(24 1/2/350) | 630 | 622.30(24 1/2) | CD24 1/2/350 8A |
CD255/4500(9 7/8/500) | 255 | 250.83(9 7/8) | 4500(500) | CD9 7/8/500 8A |
CD277/4500(10 3/4/500) | 277 | 273.05(10 3/4) | CD10 3/4/500 8A |
CD303/4500(11 3/4/500) | 303 | 298.48(11 3/4) | CD11 3/4/500 8A |
CD329/4500(12 7/8/500) | 332 | 327.03(12 7/8) | CD12 7/8/500 8A |
CD344/4500(13 3/8/500) | 344 | 339.73(13 3/8) | CD13 3/8/500 8A |
CD350/4500(13 5/8/500) | 350 | 346.08(13 5/8) | CD13 5/8/500 8A |
CD360/4500(14/500) | 360 | 355.60(14/200) | CD14/500 8A |
CD411/4500(16/500) | 411 | 406.40(16) | CD16/500 8A |
CD478/4500(18 5/8/500) | 478 | 473.08(18 5/8) | CD5/8/500 8A |
CD513/4500(20/500) | 513 | 508.00(20) | CD20/500 8A |
CD618/4500(24/500) | 618 | 609.60(24) | CD24/500 8A |
CD630/4500(24 1/2/500) | 630 | 622.30(24 1/2) | CD24 1/2/500 8A |
CD669/4500(26/500) | 669 | 660.40(26) | CD26/500 8A |
CD695/4500(27/500) | 695 | 685.80(27) | CD27/500 8A |
CD720/4500(28/500) | 720 | 711.20(28) | CD28/500 8A |
CD772/4500(30/500) | 772 | 762(30) | CD30/500 8A |
CD SERIES DRILL COLLAR ELEVATORS
Specification | Bore diameiter(mm) | Max LoadkN(tf) | External Dia.of Casings | Diameter of elevator manger(mm) | in | mm | CD 96/(Max.load) | 96.84 | 900(100) 1125(125) 1350(150) 1800(200) | 41/8 | 104.77 | 93.66 | CD 111/(Max.load) | 111.13 | 41/4 | 120.65 | 107.95 | CD 117/(Max.load) | 117.48 | 5 | 127.00 | 114.30 | CD 123/(Max.load) | 123.83 | 51/4 | 133.35 | 120.65 | CD 130/(Max.load) | 130.18 | 51/2 | 139.70 | 127.00 | CD 133/(Max.load) | 133.35 | 53/4 | 146.05 | 130.17 | CD 139/(Max.load) | 139.71 | 6 | 152.40 | 136.53 | CD 146/(Max.load) | 146.60 | 61/4 | 158.75 | 142.88 | CD 152/(Max.load) | 152.40 | 61/2 | 165.10 | 149.23 | CD 157/(Max.load) | 157.16 | 63/4 | 171.45 | 152.40 | CD 163/(Max.load) | 163.51 | 7 | 177.80 | 158.75 | CD 169/(Max.load) | 169.86 | 71/4 | 184.15 | 165.10 | CD 176/(Max.load) | 176.21 | 71/2 | 190.50 | 171.45 | CD 182/(Max.load) | 182.56 | 73/4 | 196.85 | 177.80 | CD 188/(Max.load) | 188.91 | 8 | 203.20 | 184.15 | CD 195/(Max.load) | 195.26 | 81/4 | 209.55 | 190.50 | CD 201/(Max.load) | 201.61 | 81/2 | 215.90 | 196.85 | CD 212/(Max.load) | 212.73 | 9 | 228.60 | 206.38 | CD 225/(Max.load) | 225.43 | 91/2 | 241.30 | 219.08 | CD 231/(Max.load) | 231.78 | 93/4 | 247.65 | 225.40 | CD 238/(Max.load) | 238.13 | 10 | 254.00 | 231.78 | CD 263/(Max.load) | 263.53 | 11 | 279.40 | 257.18 | CD 269/(Max.load) | 269.88 | 111/4 | 285.75 | 263.53 |
|
SUCKER ROD ELEVATORS
Sucker rod Elevators are the necessary tools to handle Sucker rod Elevators in oil well repairing.
MAIN PARAMETERS OF CDQ SERIES SUCKER ROD TUBING PIPE ELEVATORS
TYPE | OD (mm) | ROD TYPE | KN (ton) | mm | in | CDQ23(S)/135 | 23 | 16-19 | 5/8-3/4 | 135(15) | CDQ26(S)/135 | 26 | 19-22 | 3/4-7/8 | CDQ30(S)/135 | 30 | 22-25 | 1 | CDQ33(S)/135 | 33 | 25-28 | 11/8 | CDQ23(S)/225 | 23 | 16-19 | 5/8-3/4 | 225(25) | CDQ26(S)/225 | 26 | 19-22 | 3/4-7/8 | CDQ30(S)/225 | 30 | 22-25 | 4 | CDQ33(S)/225 | 33 | 25-28 | 11/8 |
|
Sucker Rod Wrench
Type GS | Handling Rod Size (in) | Max Torque (ft-lbs) | Weight (lbs) |
5/8" | 700 | 44 |
3/4" |
7/8" |
1" |
Rotary Slips
Rotary Slips can accommdate drill pipe from 23/8 to 51/2 inch (60.3-139.7mm) O.D..They are classified as type Short (SDS),Medium(SDML)and Extra Long(SDXL)according to gripping length.SDS slips are designed for shallow hole drilling,SDML slips are the perfect choice for all medium depth drilling, SDXL slips are designed for deep drilling.
Model | Slip Body Size(in) | 31/2 | 41/2 | SDS | Pipe Size | in | 23/8 | 27/8 | 31/2 | 31/2 | 4 | 41/2 | mm | 60.3 | 73.0 | 88.9 | 88.9 | 101.6 | 114.3 | Weight | kg | 53.1 | 50.3 | 48.5 | 64.9 | 61.7 | 57.6 | Ib | 117 | 111 | 107 | 143 | 136 | 127 | SDML | Pipe Size | in | 23/8 | 27/8 | 31/2 | 31/2 | 4 | 41/2 | mm | 60.3 | 73.0 | 88.9 | 88.9 | 101.6 | 114.3 | Weight | kg | 87.5 | 85.3 | 81.6 | 94 | 90.3 | 85.3 | Ib | 193 | 188 | 180 | 207 | 199 | 188 | | Pipe Size | in | - | - | - | 31/2 | 4 | 41/2 | mm | - | - | - | 88.9 | 101.6 | 114.3 | Weight | kg | - | - | - | 103.9 | 99.3 | 93 | Ib | - | - | - | 229 | 219 | 205 | Model | Slips Body Size(in) | 5 | 51/2 | SDML | Pipe Size | in | 4 | 41/2 | 5 | 41/2 | 5 | 51/2 | mm | 101.6 | 114.3 | 127 | 114.3 | 127 | 139.7 | Weight | kg | 92.5 | 88.9 | 84 | 90.9 | 84 | 82.1 | Ib | 204 | 196 | 185 | 200 | 185 | 181 | SDXL | Pipe Size | in | 4 | 41/2 | 5 | 41/2 | 5 | 51/2 | mm | 101.6 | 114.3 | 127 | 114.3 | 127 | 139.7 | Weight | kg | 107.5 | 103 | 96.6 | 106.1 | 101.5 | 95.3 | Ib | 237 | 227 | 213 | 234 | 224 | 210 |
|
WT Drill Collar Slips
WT Drill Collar Slips can accommodate drill collar from 41/2 inch（114.3mm）to 111/4 inch (285.8mm) O.D.
Type | Total segments | Drill Collar OD | Insert Bushings Size (mm) | Max.Load |
in | mm |
WT4 1/2-6 | 10 | 4 1/2-6 | 114.3-152.4 | No.3
13 1/16 | 360(40) |
WT5 1/2-7 | 11 | 5 1/2-7 | 139.7-177.8 |
WT6 3/4-8 1/4 | 12 | 6 3/4-8 1/4 | 171.4-209.6 |
WT 8-9 1/2 | 12 | 8-9 1/2 | 203.2-241.3 |
WT9 1/4-11 1/14 | 14 | 9 1/4-11 1/4 | 235.0-285.8 | No.2 14 3/8 |
WA SAFETY SLIPS
WA Safety Slips are the necessary tools. It is essential hold-up device for drilling string and drill tools. When adjusting the working range,it is only necessary to reassemble connecting pins and split pins of chain links .
MAIN PARAMETERS OF TYPE WA SERIES SAFETY SLIPS
Type | Pipes OD | No.of chain links | Max.load
KN(t) |
mm | in |
WA89-270/225 | 89～118 | 3 1/2～4 5/8 | 7 | 225(25) |
114～143 | 4 1/2～5 5/8 | 8 |
140～168 | 5 1/2～6 5/8 | 9 |
165～194 | 6 1/2～7 5/8 | 10 |
191～219 | 7 1/2～8 5/8 | 11 |
216～245 | 8 1/2～9 5/8 | 12 |
241～270 | 9 1/2～10 5/8 | 13 |
Cosumers can select the suitable No.of insert chain links according to pipe OD. |
Flake Rotary Slips
We have two types of rotary slips in our company: W3-1/5/100 and W5-7/100,they can handle various O.D.drill pipes,drill collars or casing by changing insert gripping dies or insert bowls.
Type | W31/2-5/100 | W5-7/100 | Drill Pipe
OD | in | 31/2 | 4 | 41/2 | 5 | 5 | 51/2 | 59/16 | 53/4 | 61/8 | 61/4 | 65/8 | 7 | mm | 88.9 | 101.6 | 114.3 | 127 | 127 | 139.7 | 141.3 | 146.1 | 155.6 | 158.8 | 168.3 | 177.8 | Max.load(Kn) | 1000 | 1000 |
|
TYPE DH SINGLE ARM ELEVATOR LINKS
Elevators links are suitable for hanging pipes in the operation of well drilling or repairing. According to the structures, they have two forms: Type DH & Type SH. Elevator Links conform to requirements of API Spec 8A or API Spec 8C.Elevator links are available in 150t,200t, 250t, 350t and 500t rating loads
MAIN PARAMETERS OF TYPE DH SINGLE ARM ELEVATOR LINKS
Type | Connecting sizes between
elevator link lower ears
and elevators(mm) | Connecting sizes between
elevator link upper ears
and drilling hooks(mm) | L(mm/inch) | Rated Cap.Per Set
KN(t) | r1≤ | R1≥ | l1≥ | l2≥ | l3≥ | r≤ | R2≥ | l4≤ | l5≥ | l6≥ | DH360 | 20 | 51 | 20 | 100 | 150 | 22 | 38 | 60 | 120 | 180 | 1200/ | 360（40） | DH585 | 22 | 51 | 20 | 100 | 150 | 22 | 64 | 70 | 120 | 180 | 1100 | 585（65） | DH900 | 22 | 51 | 20 | 100 | 150 | 29 | 64 | 80 | 140 | 190 | 1500 | 900（100） | DH1350 | 24 | 51 | 25 | 100 | 150 | 29 | 64 | 100 | 140 | 210 | 1800 | 1350（150） | DH2250 | 31 | 70 | 30 | 140 | 200 | 35 | 102 | 140 | 200 | 250 | 2700 | 2250（250） | DH3150 | 37 | 70 | 35 | 140 | 200 | 35 | 102 | 140 | 200 | 250 | 3300 | 3150（350） | DH4500 | 48 | 83 | 50 | 170 | 250 | 48 | 121 | 160 | 240 | 300 | 3600 | 4500（500） | DH6750 | 57 | 127 | 50 | 190 | 318 | 63 | 127 | 190 | 262 | 305 | 3660 | 6750（750） | L:Dimensions of recomendation .It can be changed if necessary. |
|
TYPE SH DOUBLE ARMS ELEVATOR LINKS
SH perfection links are designed for light loads. Rating loads of perfection links series are 50t (450kN), 75t (665kN), 150t (1335kN). Specifications data for regular perfection links are provided as follows, orders of perfection links for field service are available
MAIN PARAMETERS OF TYPE SH DOUBLE ARMS ELEVATOR LINKS
Type | Connecting sizes between
elevator link lower ears
and elevators(mm) | Connecting sizes between
elevator link upper ears
and drilling hooks(mm) | L(mm) | Rated Cap.Per Set
KN(t) | r1≤ | R1≥ | l1≥ | l2≥ | r≤ | R2≥ | l3≤ | l4≥ | SH225 | 15 | 29 | 20 | 58 | 22 | 38 | 35 | 90 | 600 | 225（25） | SH360 | 20 | 51 | 20 | 100 | 22 | 38 | 45 | 100 | 1100 | 360（40） | SH585 | 22 | 51 | 20 | 100 | 22 | 64 | 65 | 120 | 1100 | 585（65） | SH675 | 22 | 51 | 20 | 100 | 29 | 64 | 75 | 160 | 1500 | 675（75） | SH900 | 22 | 51 | 25 | 100 | 29 | 64 | 80 | 160 | 1500 | 900（100） | SH1350 | 24 | 51 | 35 | 100 | 29 | 64 | 100 | 160 | 1700 | 1350（150） | L:Dimensions of recomendation .It can be changed if necessary. |
|
Purpose: Sucker rod handling equipment for every depth and operating condition.
Sizes and Capacities: The Model R-20 has a rated capacity of 20 tons and the Model R-35 has a rated capacity 35 tons in accordance with API standards.
